Multi-brand replacement seal for Ocean Kayak Scupper Pro (Pro model made 2001 and before), all Aquaterra Prism kayaks, Perception Illusion, Wilderness Systems Freedom kayaks, original WS Tarpon 160 2-hatch, Ocean Kayak Scupper Classic and original Scupper. May fit other makes and models of kayaks. Sold by the foot. HATGAS
This gasket is generic and can be used on the large hatches commonly found on some sit-on-top kayaks. Sold by the foot! Please select length carefully, get extra, it will be needed. Not all kayak makes and model are outfitted with this exact seal. See image for cross section view below and compare to old seal. Tube dia is 3/4 in. U-Channel is 1/2 in. deep.
Short list of fits:
Ocean Kayak Cabo, Drifter, Pro SI, Caper, older version Prowler 15 (two seals per hatch).
Ocean Kayak Scupper Pro made in 2001 and older (two seals per hatch).
Ocean Kayak Scupper and Scupper Classic (one seal per hatch).
Wilderness Systems original 16 foot Tarpon 160 with 2 strap-on hatches (one seal per hatch), uses about 12 feet.
Wilderness Systems Freedom (one seal per hatch), large hatch on stern and a small on bow needs about 9 feet per kayak.
Aquaterra Prism (two seals per hatch).
Perception Illusion kayak (one seal per hatch).
Perception Sundance 12.0 Airalite kayak (one seal per hatch).
Adhesive is not needed. See video selections. If you feel you must have glue use 3M weather strip adhesive, or similar glue, from a hardware store. (This seal was formerly sold under Ocean Kayak part numbers 07.1036.0000 and 07.3009.0000.) This Gasket is Sold By the Foot. Select the number of feet you want and a piece will be cut to length for you.
Related Article: Maintenance Of Large Cargo Hatches.
Related Videos:
Perception Illusion Hatch Gasket Replacement Gasket removal and replacement (on hatch cover, applicable to Prism and other kayaks)
Scupper Pro Hatch Repair Part 1 of 3 Gasket removal and replacement (on hatch opening, applicable to many kayaks)
