This is a discontinued Product! Left here for your reference. This hatch sytem was common on Old Town kayaks circa 2005 to 2010. Old Town has stopped stocking this Tempress made Space Hatch as replacement part. Read this page for solutions. Please visit the Tempress web site for original parts, such as gaskets and knobs. Scroll to bottom of this page for leak solutions.
If you have a lost the Hatch Cover (or broken the hinge), or if you have a leak, read the information below.
Retrofit Option (for Old Town kayaks that were outfitted with a Space Hatch, large or small):
The original hatch rim must be removed. The opening in the deck MUST be closed or reduced in size. Use this link for a Hatch Patch Panel. The original hatch rim can be used as a template to cut the hatch shape and drill out the screw holes. Once this is done you can install a common round hatch onto the patch panel as described below:
Replace the large 17 inch version Space Hatch with the Hatch Patch Panel and the 10 Inch Performance Hatch Lid and Ring for replacement of the large size.
Replace the small 11 inch version Space Hatch with the Hatch Patch Panel and the 6 In. Hatch Lid and Ring, Recreational (Kajak 15cm).
TopKayaker has a small supply of Space Rims. Rims can be used to replace a cracked rim or broken hinge. Otherwise contact Tempress for original parts such as gaskets and knobs.
See Rim Replacement for Plastic Kayaks (at Pinterest). It will address the hatch patch panel as a "donut". This process is applicable to the Space Hatch retrofit described on this page.
Use these links for other deck plate and hatch kit options. For hatch retrofit instructions see our Installing the Cobra A Hatch article to provide insight into how this is to be done.
Retrofit Option (for Old Town Trip Kayak only): It is possible to retrofit the Old Town Trip kayak and Old Town Trip Angler kayak with the Vapor 10 Hatch Cover Kit. It will end up looking like the Old Town Vapor XT. Use links to left for more information. Important! The Vapor 10 Hatch will not seal out water! This kit can be used to secure loose cargo, for cosmetic reasons and possibly customized following the principles at this link: Maintenance Of Large Cargo Kayak Hatches. It is up to you invent and implement a water tight seal!
The product information below is left here for reference. The Old Town Space Hatch was made by Tempress Marine Products. The hinged hatch cover can dis-connect from the rim mounted on the kayak deck. Cover can snap on and off! The Space Hatch products originally came as a rim flange and removable cover lid with a foam rubber gasket to seal against the deck.
The Large Hatch has two twist latch and hinge. Large Cover was 17 in. long by 12.25 in. at the widest. Large Rim-Flange has 14 holes, same dimensions as cover. Old Town Large Hatch part number was 01.1315.3502. aka TMP-60001.
The Small Hatch has just one twist latches and hinges. The Small Hatch was 11 in. long by 8 in. at the widest. Rim-Flange has same dimensions as cover. Old Town Large Hatch part number was 01.1315.3501).
The Space Hatch was the replacement for the rubber egg shape hatch cover now also discontinued, found on some Necky kayaks as well as some Old Town kayaks that were outfitted with the same egg shape rubber hatch (circa 1st years of the 21st century) also in large and small sizes. We are hoping that Kajak Sport or Sea-Lect (companies that copy hatch covers) will copy this rubber hatch system, if they do so this it would be the best possible retrofit option for the large and small Space Hatch.
Your kayak may have a leak. Nine times out of ten the leak in the bulkhead behind the seat. Many kayaks were installed with a foam . Foam rubber gaskets will compress over time and fail. Some were defective to start with. You will be better served by using clear silicone sealant under the rim-flange. This will require removal and a re-install of the hatch. See how to at Installing A Kayak Hatch. Contact Tempress for other gasket that seals the cover against the rim, or better yet, visit their web site and look for the large rectangle gaskets that you will trim to fit. Expect replacement knobs to be white.
See related article: Kayak Hatch Replacement Options Part II - Deck Plates.