Sold in pairs. Mounting hardware is NOT included. See hardware notes below.

Versions of these generic Foot Rails and Pegs have been used on many kayak makes and models, such as some kayak by Wilderness Systems, Heritage, Legacy, Emotion, Hurricane, Liquid Logic, Jackson and Native Watercraft. Same as the Hobie Compass Foot Brace Kit 72020150. Boltholes are 14 9/16 inches on center, with a third center bolthole.

Best used for replacement parts or custom kayak construction. The matching generic foot pegs are also available separately. Right and left is the same. Sold as a pair.

Hardware and Mounting recommendations:
Modern Rails with slots; Use four 10-32 machine screws 1 inch long, four cap nuts, and washers are recomended. The head of the screws show on the outside of the kayak. Use a wrench inside. Use oversize well nuts for sit-on-top kayaks with no inside access. There could be some hardware complications when used on older kayaks. Contact us as needed.

Some silicone sealant can be used if desired or necessary. Very tight screw holes will not require sealant. 

Old Info:
Discontinued Classic Rails with small round holes each end used four number 14 truss head screws. The head of the screws show on the outside of the kayak. A wrench was NOT needed. You are NOT purchasing older Discontinued Classic Rails!