Generic Foot Brace Rails, pair

This most recent version will accommodate screw space of 14.25 inches to 15 inches on center. See Hardware recommendations below.

Can be used as replacement rails on popular kayaks such as Jackson Kayaks (1358), older Wilderness Systems (3270-0106) and the Native Watercraft Easy Footbrace system (PFBR106). All these Generic Foot Brace Rails are more or less the same, subtle changes over time, presumed to all be made by the same plastic molder. Can be used with the generic Foot Pegs. The original screw hole spacing is 14 5/8 inches. 

This set does not include the foot pegs or mounting hardware. Sold as a pair.

Hardware and Mounting recommendations:
Modern Rails with slots; Use four 10-32 machine screws 1 inch long, four cap nuts, four washers are optional. The head of the screws show on the outside of the kayak. Use a wrench inside.
Classic Rails with round holes each end; Use four number 14 truss head screws. The head of the screws show on the outside of the kayak. A wrench is NOT needed.
Some silicone sealant can be used if desired or necessary. Very tight screw holes will not require sealant.
There could be some hardware complications when used on older kayaks. Contact us as needed.