70P Compass Deck Molding

70P Compass Deck Molding
  • Model: VCP-4070 (DW4)
  • Shipping Weight: 0.95lbs
  • 1 Units in Stock


Add to Cart:

The modern version compass deck molding, from Valley Canoe Products can be used on many fiberglass kayaks to mount the 70P Deck Compass. This part is made of fiberglass. Made to be used on a composite hull deck, with limited curvature, but could be used on plastic hull kayaks too.

There are no instructions! The process should go something like this after you locate the best position: 1: Create a cardboard mock-up and cut the hole for the molding to insert into. 2: Use the mock-up as a template and mark the cut line on the deck of your kayak. 3: Carefully cut out the hole in on deck. 4: Use a string tied the center line to make sure that the molding is centered and even. 5: Use G/flex 655 thickened epoxy to bond the molding to the deck. 6: Let the epoxy fully cure before you mount the compass (following compass mounting instructions).

Screws and nuts with silicone sealant might also be a viable install option as well. Use the compass link above and the info links below:

See the 70 P Compass Install Video.

Q: Will stainless steel screws affect my compass reading? Click this Compass Screws Video Link and find out. (Answer: NO)

Featured  [more]

Copyright © 2024 TopKayaker. Powered by Zen Cart
Customized and Hosted by JEANDRET

Valid CSS!