Harmony Repair Resin for Royalex is a 2 oz supply of Marine-Tex Epoxy Repair Putty.
Marine-Tex is the legendary high-strength repair compound designed for filling, bonding and rebuilding wood, fiberglass, ceramic, glass, metal, masonry and many plastics. Marine-Tex is manufactured to the highest standards to meet the harsh demands of the marine environment. Marine-Tex handles like putty, hardens like steel and sands like wood.
Marine-Tex is a creamy paste consistency that can be applied on vertical or horizontal surfaces, easily fills gaps, and can be shaped to rebuild damaged components. Marine-Tex paste provides waterproof repairs that can be used with fiberglass tape or cloth to bridge holes and reinforce structural repairs as needed. Make emergency and permanent repairs to hulls, decks, stripped fasteners, and broken elements. Marine-Tex can be sanded or ground to shape, tapped and drilled, and finished with most common paints and coatings.
This 2 oz. Kit will cover 17 square inches at 1/8 inch thick.
Mixing Ratio: 5 parts epoxy resin to 1 part hardener - by volume. When mixing by weight, the ratio is 6.3 parts resin to 1 part hardener. Always keep epoxy at room temperature before mixing.
Cure Time: 24 hours at a constant temperature of 72 degrees Fahrenheit. Lower temperatures will create longer cure times.
Application Tips: Surface preparation is the key to epoxy adhesion. Remove all contaminants (dirt, oil, grease) with acetone or lacquer thinner. Sand area, then remove grit to improve adhesion. Mix the proportioned components with a putty stick or hard plastic squeegee on a broad, flat surface-wood, cardboard or plastic. Mix only enough for 15 or 20 minutes of nominal working time. After components are thoroughly mixed, spread your mixture into a long thin line to ensure a streak-free consistency and to provide you with maximum working time.
The Harmony recomends this for Royalex Repairs, and to restore strength to damaged areas. The resin forms a paste that fills gaps well and cures to an extremely hard, durable finish. Resin is thick enough to fill holes and dents by itself yet viscous enough to be worked into the weave of cloth used to bridge gaps and tears. Cures to a white finish that can be easily be painted to match original hull color. Learn more about Composite Repair.
PLEASE NOTE: This item cannot ship by air because of hazardous materials. Continental USA shipping ONLY!
This item ships only via U.S. Mail Parcel Post Select, by truck. Expect about one week or more. North East States may be less than one week. Do Not request shipment to Alaska, Hawaii and Puerto Rico.
Overnight to 3 day delivery is Not available for this item.