Sea Dog 5 in. Screw-Out Deck Plate

Sea Dog 5 in. Screw-Out Deck Plate
  • Model: SLD-K337155 (5B3)
  • Shipping Weight: 0.85lbs
  • 19 Units in Stock

$19.95

Add to Cart:

Use as a replacement hatch cover, or for new installation, for a five inch Sea-Lect Designs (aka Sea Dog) deck plate. Can be use as a replacement hatch, rim and cover, for many Aquaterra, Islander, Perception kayaks and some older Wilderness Systems kayaks (pn 8025319). This hatch is found on the original models of the Oru Folding Kayak (clear and black are same!). The rim will NOT support a bag, and does not have a bag collar. 

Note: The Sea Dog 5 in. Screw-Out Deck Plate is the same footprint and screw pattern as the Viking 5 inch (Part Numbers 1057 and 1099). This is a common size deck plate for a wide range of boat brands, and assumed to screw into a Viking Five Inch Rim.

Please make sure to view the linked information on this page.

  • Hatch Rim Outer Dimension (OD): 6 5/8 inches 
  • Hatch Rim Inner Dimension (ID): 5 inches
  • Deck Cut-Out Diameter: 5 3/8 inches 
  • Hatch Cover Diameter: 5 3/8 inches 
  • Screw Holes On Center (OC): 6 1/8 inches, across noon to six o'clock
  • Shape: Round

Additional Information

Instructions are not included! For best results use no. 8 screws and nuts. Use silicone sealant between hatch rim and deck surface when installing the deck plate rim-flange. The rim has an imbedded gasket, rim replacement is the best way to improve seal. For information about installing a five inch hatch watch Four Inch Hatch Install VideoAlso read Kayak Hatch Replacement Options Part II - Deck Plates.


Featured  [more]

Copyright © 2024 TopKayaker. Powered by Zen Cart
Customized and Hosted by JEANDRET

Valid CSS!