This is a discontinued product left here for your reference. Please read carefully.
Some Outfitting Knobs have been changed over time and-or have been reported as discontinued by Confluence. Color does not necessary ID thread type of kayak model year.
Yellow Tri-Wing-Nut, pair (M6) 9800762 Knobs for seats and foot braces common on Dagger brand kayaks. These would fit the Dagger bulkhead foot brace system circa 2008 and later, the Dagger Play Seat system and mate with metric M6 thread screws. M6 = a 6.0-mm diameter hole. The M indicates that it is a metric size. The Knob Tether Leash is recommended for this part to prevent loss. These M6 Yellow Seat Knobs typically are found on versions of the Dagger Mamba, Axiom and Nomad made some time before 2018. Test your screw with a M6 and/or 1/4-20 nut from a hardware store. These yellow knobs have the same thread as the modern Red M6 Knobs. OUTKNOB
Yellow Tri-Wing-Nut (1/4-20) 9800034 (Shown in detail at top of page) Knob for seats and foot pegs common on older Dagger brand kayaks, and some Wave Sport kayaks. Fit Dagger Bulkhead foot brace and Dagger foot brace systems, presumed to be circa 2008 and older. Compatible with the Dagger Play Seat system. Threads in nut mate with 1/4-20 thread screws. (Alternative part number 9800721). These older Yellow knobs are the same as the modern Gray 1/4 20 Knobs. The Gray 1/4-20 Seat Knobs are expected to be compatible with older versions of Dagger and Wave Sport kayaks (possibly some modern versions too). Test your screw with an M6 nut or 1/4x20 nut from a hardware store. The Yellow Tri-Wing-Nut came as a TEN Pack. The 9800034 original 1/4 20 Yellow Knobs were a match to the 9800614 original 1/4 20 Red Knobs. OUTKNOB WAVEOUT
